Ergonomic Approach to Avoid Product Defects
DOI:
https://doi.org/10.59890/11c7nr34Keywords:
Ergonomics, Fatigue, Product DefectsAbstract
Working in non-ergonomic conditions will easily tire which then experiences a decrease in work concentration, ultimately there are many errors in work including experiencing product defects. This paper is designed descriptively. This design in data collection uses literature, namely data from various opinions and research results. Then analyzed and discussed also using descriptive. Conclusion, Ergonomic working conditions require the design of work tools that are adjusted anthropometrically so that the work position or work posture is ergonomic, the design of the workplace so that an ergonomic environment is obtained for working, and the work process or system is not repeated back and forth. With these ergonomic conditions, workers do not get tired easily which ultimately does not result in product defects
References
Bonitaa Melinda Pangaribuan, Naniek Utami Handayani, 2016, Analisis penyebab cacat produksi roma kelapa pada mesin oven dengan metode failure modes effects analisis (FMEA) (studi kasus pda PT. Mayora indah Tbk, Departen Teknik industry, Fakultas Teknik, Universitas Diponegoro, Semarang.
Hari Purnomo, Adnya Manuaba, Nyoman Adiputra, 2007, Sistem kerja dengan pendekatan ergonomic total mengurangi keluhan musculoskeletal, kelelahan dan beban kerja serta meningkatkat produktivitas pekerja industry gerabah di Kasongan, Bantul, Indonesian journal of biomedical sciences, Vol 1 no.3, Progdi ilmu Kesehatan, Universitas Udayana, Denpasar.
Mosen Zare, Michel Oroq, 2015, Apakah ergonomic meningkatkan kualits produk dan mengurang biaya? Artikel ulasan, ResearchGate, Human factors and ergonomics manufacturing and service industries, University of technology of Belford-Montbelard, Prancis.
Petrus Wisnubroto, Titin Isna Oesman, Wiwin Kusniawan, 2018, Pengendalian kualistas terhadap produk cacat menggunakan metode seven tool guna meningkatkanproduktivitas di CV. Madani plast Solo”, Industral engineering journal of the University of sarjanawiyata Tamansiswa, Vol 2 no.2, E-ISSN 2613-9812, Yogyakarta.
Puti Dwi Ginanti, 2025, Ergonomi, PT. Prodi occupational helth Indonesia, prodiaohi.co.id
Tribuana Yogaswara, Zulkifli Djunaidi, 2023, Analisis ergonomic di tempat kerja dan kelelahan pada pekerja dalam Upaya peningkatan kinerja di PT.X, Jurnal Kesehatan Masyarakat inovatif, Volume 6 nomor 4, Fakultas Kesehatan Masyarakat, Universitas Indonesia, Jakarta.
Tribuana Yogaswara, Zulkifli Djunaini, 2023, Analisis ergonomic di tempat kerja dan kelelahan pada pekerja dalam Upaya peningkatan kinerja di PT.X”, Jurnal Kesehatan masyrakat inovatif, Volume 6 no.4, Fakultas Kesehatan masyrakat, Universitas Indonesia, Jakarta.
Tyastiana Arbianisa, Agus Suwarni, Muryoto, 2016, Analisis ergonomic posisi kerja dan kelelahan kerja pada tenaga kerja di CV. Sinar albasia utama Kalasan, Sleman, Provinsi DI Yogyakarta, Jurnal Kesehatan lingkungan, Vol 7 no.4, Poltekes Kemenkes Yogyakarta.
Wibisono, Olivia, 2020, Integrasi antara ergonomic dan lean sigma dam perbaikan proses untuk mengurangi pemborosan di home industry victor Mojokerto, Repository, Departemen of industrial engineering, Faculty of engineering, University of Surabaya.
Yodi Prasetyo, Budi Aswin, La Ode Reskiaddin, 2024, Kajian bahaya potensial ergonomic pada pengrajin batik (studi kasus craftmen in ulu Gedung sub-district), Jurnal kesmas Jambi, e-ISSN 2580 5894, Volume 8 no. 1, Progdi ilmu Kesehatan Masyarakat, Universitas Jambi.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Gempur Santoso (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
